The INFRARED CONTROL UNIT consists of the Transmitter and the Receiver assemblies (the PCBs with all their electronic components soldered in place), and all other parts required to operate the unit. The INFRARED CONTROL UNIT can transmit on six (6) bands, so that 6 different devices can be operated at the same time, by selecting different bands, using the band selection switch.
The Transmitter is used to transmit commands to the Receiver, which is mounted on a vehicle or whatever device you choose to make.
On each band the Transmitter can send up to four signals, e.g. to control 2 motors to go forward and reverse. IRCU consists of the Transmitter and Receiver PCBs, switches and battery holders.
The IRCU is for indoor use only and will not operate outdoors. It can operate up to a distance of approximately 20 metres.
Codes: IRCU with PCBIR6-A (INFRARED CONTROL UNIT with ASSEMBLED PCBs)
IRCU with PCBIR6-UN (INFRARED CONTROL UNIT with UNASSEMBLED PCBs)
Specify which version is required.
NOTE: If buying a class set of JOUSTER/IRCU, we recommend buying one set with assembled PCBs, for visual comparison and testing purposes.
Soldering required: Yes
Hours to construct: 4 - 6 (assembled PCB version) / 6 - 8 (unassembled PCB version)
Types of components included: Mechanical, electrical / electronic / PCB
Instructions (teaching unit) included: Yes
Batteries required: 6 x AA batteries (not included)
Click here to see our teaching unit Overview for important information relating to the kit including additional requirements.
Price per kit (Infrared Control Unit with Assembled PCBs):
$19.70 (1 - 19)
$19.20 (20+)
Price per kit (Infrared Control Unit with unassembled PCBs):
$16.70 (1 - 19)
$16.20 (20+)
TECHNOLOGY KIT CONTENTS. Our kits contain all the electrical, electronic and mechanical components needed to build the device (only). The teacher supplies readily available material for wiring, making body parts, etc. – NO BODY PARTS OR WIRES ARE INCLUDED in the kits. Each order includes comprehensive instructions / Teaching Unit.