Image 1 of 1
This is a small buzzer for the LilyPad system.
Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling.
Loud enough to hear inside a pocket but not obtrusively loud.
This is an inductive buzzer meaning that it will act as a short to ground if you are not actively driving it.
Recommend that both I/O pins are put to low (0V) when the buzzer is not used.
20mm outer diameter.
Thin 0.8mm PCB.
These buzzers are NOT WASHABLE. Washing these buzzers will damage them.
